Полный курс по взлому WiFi и проводных сетей с нуля (2025) [Udemy] [Zaid Sabih]

Складчина: Полный курс по взлому WiFi и проводных сетей с нуля (2025) [Udemy] [Zaid Sabih]

Learn Network Hacking From Scratch (WiFi & Wired)
Язык английский + озвучка на русском языке (ИИ)



Узнайте, как взломать как WiFi, так и проводные сети, как хакеры-блэкхэты, и научитесь защищать их от таких атак.

Добро пожаловать на этот комплексный курс по сетевому хакингу! В этом курсе вы начнете как новичок, не имеющий предварительных знаний о тестировании на проникновение или хакинге, а к концу курса вы достигнете среднего уровня, который позволит вам взламывать сети и подключенные устройства, как хакеры-блэкхэты, и защищать их, как эксперты по безопасности.

Для кого этот курс:

• Кто заинтересован в изучении тестирования на проникновение в сеть
• Кто заинтересован в изучении способов защиты сетей от хакеров.

Содержание курса:

66 лекций • Общая продолжительность 7 ч 55 мин.

• Введение
• Подготовка — настройка лаборатории
• Основы сетей
• Атаки до подключения
• Получение доступа
• Получение доступа — взлом WEP
• Получение доступа — взлом WPA/WPA2
• Получение доступа — безопасность и смягчение последствий
• Атаки после подключения
• Атаки после подключения — сбор информации
• Атаки после подключения — атаки «человек посередине» (MITM)
• Атаки после подключения — получение полного контроля над устройствами в одной сети
• Обнаружение и защита от ARP-поизонирования
• Бонусный раздел

Промо на русском:



Автор Zaid Sabih

Профессиональный этичный хакер, ученый-компьютерщик, основатель и генеральный директор zSecurity & Bug-Bounty. С энтузиазмом использует свои навыки для повышения безопасности организаций и отдельных лиц путем выявления и устранения уязвимостей в их системах.

Спойлер: Оригинал

Welcome to this comprehensive course on Network Hacking! In this course, you will start as a beginner with no previous knowledge about penetration testing or hacking and by the end of it you'll be at an intermediate level being able to hack into networks and connected devices like black-hat hackers and secure them like security experts.

This course is focused on the practical side of penetration testing without neglecting the theory. Before jumping into hacking you will first learn how to set up a lab and install needed software (works on Windows, Mac OS X and Linux), then the course is structured in a way that will take you through the basics of linux, computer systems, networks and how devices communicate with each other, then you will learn how to exploit this method of communication to carry out a number of powerful attacks.

The Course is Divided into three main sections:

Pre-connection attacks: In this section you will learn how networks work, how devices communicate with each other and how the information is transferred in a wireless networks. You will also learn some basic terminology, what is a channel ? MAC address ? what is managed mode ? What is monitor mode and how to enable it ? what is sniffing and what is it limited to ? so in this section we still don't know much about penetration testing , all we have is a computer and a wireless card connected to it, you will learn how to start gathering information using your wi-fi card (packet sniffing) and you will learn how to control connections around you (ie: deny/allow devices from connecting to networks) without knowing the password of the target network.

Gaining Access: Now that you gathered information about the networks around you, in this section you will learn a number of methods to crack the key and get the password to your target network whether it uses WEP, WPA or even WPA2.

Post Connection attacks: Now that you have the key, you can connect to the target network, in this section you will learn a number of powerful techniques that allow you to gather comprehensive information about the connected devices, see anything they do on the internet (such as login information, passwords, visited urls, images, videos, etc.), redirect requests, inject evil code in loaded pages and even gain full control over connected clients! All the attacks here work against both wireless and wired networks. You will also learn how to create a fake WiFi network, attract users to connect to it and use all of the above techniques against the connected clients.

All the attacks in this course are practical attacks that work against any wireless enabled device , ie: it does not matter if the device is a phone , tablet laptop, etc. These attacks also work against all operating systems (Windows, OSX, Linux IOS, Android, ect.). in each technique you will understand the theory behind it and how it works, then you'll learn how to use that technique in a real life scenario, so by the end of the course you'll be able to modify these techniques or combine them to come up with more powerful attacks and adopt them to different scenarios and different operating systems.

With this course you'll get 24/7 support, so if you have any questions you can post them in the Q&A section and we'll respond to you within 15 hours.

Notes:

• This course is created for educational purposes only and all the attacks are launched in my own lab or against devices that I have permission to test
• This course is totally a product of Zaid Sabih & zSecurity, no other organization is associated for certification exam for the same. Although, you will receive Course Completion Certification from Udemy, apart from that No OTHER ORGANIZATION IS INVOLVED

Course content:

• Introduction
• Preparation - Setting Up The Lab
• Network Basics
• Pre-Connection Attacks
• Gaining Access
• Gaining Access - WEP Cracking
• Gaining Access - WPA/WPA2 Cracking
• Gaining Access - Security & Mitigation
• Post Connection Attacks
• Post Connection Attacks - Information Gathering
• Post Connections Attacks - Man In The Middle Attacks (MITM)
• Post Connection Attacks - Gaining Full Control Over Devices On The Same Network
• ARP Poisoning Detection & Security
• Bonus Section

Цена 9550 руб. (99,99 евро)
Скрытая ссылка